View Full Version : Monitor not powering on
lenmccart
Dec 27, 2008, 02:25 PM
I have an 2 year old (just out of warranty of course!) HP vs17d that isn't getting any power.
I tried changing the power cord and using a different plug but it still wouldn't power up. I plugged a functioning monitor into the computer using the same cord and plug and it worked fine, so I know it has something to do with the monitor.
Does anyone have any ideas of how I can fix this monitor?
Thanks,
Adam
hsappleton
Dec 27, 2008, 03:45 PM
Are you using the original power cord you received with this monitor?
lenmccart
Dec 27, 2008, 04:26 PM
I tried using the original power cord and other power cords that I had laying around.
When I set up the a working monitor, I used the same power cord and the monitor started up right away.
hsappleton
Dec 29, 2008, 09:57 AM
This is obviously a power problem. I looked at the HP documents concerning this and could come up with nothing. Maybe you can. Check out:
HP Support & Drivers (http://welcome.hp.com/country/us/en/support.html) and then enter your model number
Pvt Dave
Aug 2, 2009, 02:04 PM
A friend and I have the same series HP monitors and he has repaired his by replacing some bulging capacitors in the power supply, got them at Radio Shack. I will be trying that on mine. Note: The top of the capacitors, where the X mark is, should be flat. If they have any bulge they are failed or will soon fail. Be advised that some boards are fabricated with no-lead solder, the melting point is much higher than regular solder.