View Full Version : Stitches won't stay tight
lemonlime
Dec 26, 2008, 04:02 PM
Hey I have a Euro Pro X Model # 9120 sewing machine, the stitches won't stay tight even after turning the tensioner knob on top. We also sent it out for repair and maintenance,after a few dresses the problem appeared again. Any Advice?PS the machine is only about two years old!
KISS
Dec 26, 2008, 06:13 PM
Post a pic using "go advanced". I'd like to see how it's threaded. If you can tell me if it's the top or the bottom stitch that's loose.
I suspect it's not threaded quite right.
lemonlime
Dec 26, 2008, 10:33 PM
Post a pic using "go advanced". I'd like to see how it's threaded. If you can tell me if it's the top or the bottom stitch that's loose.
I suspect it's not threaded quite right.
Bottom stitch is loose
lemonlime
Dec 26, 2008, 10:42 PM
Wifey says bottom stitch is loose!
lemonlime
Dec 26, 2008, 10:47 PM
Wifey said it's the bottom stitch!
polly123
Dec 28, 2008, 10:34 PM
The bobbin also has a tension. Take the bobbin housing out and find the tiny screw on it and tighten just a little until the thread pulls tighter.