I have a Fahrenheat wall heater. The fan runs but the air is cool. I'm unable to find the paperwork for this heater and I do not remember the model number, but it is a smaller unit. I'd appreciate any assistance with troubleshooting the problem. Can I repair or do I need to purchase another heater? This unit is only about 5 years old. I have cleaned it but no help.

Take the bottom cover off and see if the pilot is lit. Also see if main burners are lit when thermostat is turned way up. If main burners don't ignite you most likely have a bad high limit switch.

If yours is electric yhe inst below might help. They are generic in nature.

http://www.marleymeh.com/develop/prod_pdf/instructs/5200-2638-000.pdf

If yours is electric yhe inst below might help. They are generic in nature.

http://www.marleymeh.com/develop/prod_pdf/instructs/5200-2638-000.pdf

This is small, wired electric unit. I will see if I can locate the "fuse" it refers to. The manual states to check with the factory. Hopefully it's something I can repair myself. Thank you for your reply. I really appreciate it.

take the bottom cover off and see if the pilot is lit. Also see if main burners are lit when thermostat is turned way up. If main burners dont ignite you most likely have a bad high limit switch.

This is a small, wired electric unit. Thank you for trying to help. I really appreciate it.

Just assumed it was gas, sorry. I won't be much help on electric. Hope you get er going. Take care,

Lee

Any component in the electric heater circuit could be the culprit. Troubleshooting will be rather difficult without a voltmeter.