I have 110 volts going into smart valve but no voltage comeing out to blower motor. Could a bad control board cause this or is it the smart valve ?

First of all what is the exact model number of your furnace.
How many flashes is it showing on the control board.

First of all what is the exact model number of your furnace.
How many flashes is it showing on the control board.
Model number is H9MPD125L20B1 3 flashes on smart valve [ green light] thanks

And what do the 3 flashes mean according to the chart on the back of the blower door? I should have asked before but Heil as changed there flash code and I do not have all the copys.

And what do the 3 flashes mean according to the chart on the back of the blower door? I should have asked before but Heil as changed there flash code and I do not have all the copys.? normal as far as I can tell according to chart. Just not getting power out to blower motor from smart valve. Thanks again for reply

Dag gone Heil. I will need the exact and complete model number for the gas valve that is installed in the unit. There were more that one offering on there furnaces so post the Honeywell numbers off the valve.