View Full Version : Can't get cold water in sink to shut off using handle
 
 DB1833
Nov 19, 2008, 11:01 AM
I replaced faucet and turned on main h20 valve then turned handle for cold water on and it went on but when handle is turned in off position it still comes out
 speedball1
Nov 19, 2008, 11:52 AM
One handle or two knobs?  What's the name and model number?  Back to you,  Tom
 DB1833
Nov 21, 2008, 08:51 AM
speedball1 the faucet is delta although I don't have a specific model  it is similar to Orleans Centerset Bath Faucet : Bath Products : Delta Faucet (http://www.deltafaucet.com/bath/details/2569-LHP%20H269.html) cenerset it has separate handes for the hot and cold water
 afaroo
Nov 21, 2008, 09:46 AM
I would return it back to the store for replacement it is under warrant, other wise close the angle valve remove the stem turn on the water for a few seconds to flush out all the debris close the valve check inside for an debris remove if any, assemble the faucet and  check if it works, good luck.
 
John