I have a Kenmore Elite (calypso) Model#110.21062000 that will not move from the rinse cycle into the spin cycle. It will give to different error codes occassionally: 1) "LD" - long drain, 2) "SL" - suds lock. In both cases the unit appears to be draining without any difficulties as observed by the drain tube. This problem is only manifesting itself on the "Normal" and "Whitest Whites" modes. Any info would be greatly appreciated.

I was using the wrong detergent in mine if you are not using an HE detergent or using too much it might be the problem

To many electronics. If it spins in other modes, then it's not the lid switch. Ezmergustman is probably right.