I am not sure were the fuel line go to the carburator Poulan 2375

Hello thewmas:

You can View a Breakdown/IPL of the Mower at this Site Addy, EMPARTweb Electronic Parts Catalog -- Version 4.9.4.1 (http://hayward.arinet.com/scripts/EmpartISAPI.dll?MF&app=ASP&lang=EN&TF=Mainframe&LoginID=hywd&loginpwd=hywd&Partner=HYWD) and Select the Catalog Poulan/Weed Eater. If this Unit has 2 Lines from the Tank, then 1 is the Feed and has a Filter on it and the Other is a Return. If you Attach the Fuel Lines Wrong, then Reverse them and the Unit should Run Properly. If you Hit a Snag or this Does Not Correct the Problem, I am Here if You Require More Assistance. Hope this Helps. Let me Know What Happens, Please. Thanks.

Good Luck

Respectfully

John

Hey John
I had an extra problem... a Line from the crankshaft... that's :-
2 holes in the fuel tank , 2 places on the Carb , a crankshaft hose... that goes??
Geee , It's a bugger when your son pulls your chainsaw apart & don't remember where
The fuel lines go... I do admit , that they where brittle & fell apart .

Cheers , Steve.

OK... I know this is old but the first link doesn't work so a quick note on where the lines go. There are two holes going into the fuel tank. One on the choke side and one by the primer bulb. There are two nipples on the carb, one on the top and one on the main body. One line goes from the top nipple of the carb down through the hole beneath the primer bulb assy. Another line goes from the right nipple on the primer bulb assy to the carb nipple on the lower main body. The third line goes from the left nipple on the primer bulb assy, down through the hole on the choke side of the chainsaw.