frebrd18
Oct 16, 2008, 03:48 PM
Hi,
I have a Kenmore Ultra Wash Dishwasher (665.15822000) that is about 8 years old. It has started running for about the first 10-15 minutes of its cycle and than going to 2 min remaining on the digital display and ends leaving the hi temp scrub light flashing. I reset it about a week ago using the tips on this site, hi temp scrub - air dry 3 times and the unit worked for a few cycles. I also reset the breaker at that time. Now it is doing the same thing. Does anyone have any ideas for moving forward with the diagnosis? It's been a good dw up to this point, and I'll probably sink a little $ in parts into it before I replace it. Any help would be appreciated.
I have a Kenmore Ultra Wash Dishwasher (665.15822000) that is about 8 years old. It has started running for about the first 10-15 minutes of its cycle and than going to 2 min remaining on the digital display and ends leaving the hi temp scrub light flashing. I reset it about a week ago using the tips on this site, hi temp scrub - air dry 3 times and the unit worked for a few cycles. I also reset the breaker at that time. Now it is doing the same thing. Does anyone have any ideas for moving forward with the diagnosis? It's been a good dw up to this point, and I'll probably sink a little $ in parts into it before I replace it. Any help would be appreciated.