voidwalker78
Oct 4, 2008, 04:12 AM
I recently had my furnace replaced in November of 2007, with a Miller. I ran out of Kerosene in March of 08 so I rode out the rest of the winter. I recently received a delivery of fuel and tried to fire up my furnace. It started running the fan with no problems. There was a box that was blinking so I followed the directions and reset it; still no heat.
I know on my older furnace I had to re prime it using the bleeder valve but for some reason I can't find one.
I've turned the thermastat back down to zero but the fan still runs now with the furnace door closed; going to cut the power switch until I can get some input.
I know on my older furnace I had to re prime it using the bleeder valve but for some reason I can't find one.
I've turned the thermastat back down to zero but the fan still runs now with the furnace door closed; going to cut the power switch until I can get some input.