Hi,
I have a Matsonic MS8308EP board & Crucial Scan says that it only accepts Non-ECC RAM.

However I am currently running my PC with ECC RAM installed which WinXP correctly recognises as 2 x 512 sticks. Since it is obviously working should I leave well alone or will it damage my PC using these sticks.

The sticks of RAM currently installed are :

2 x 512Mb - Samsung PC133R ECC SDRAM M390S6450AT1-C75

I am thouroughly confused & bewildered by the intricacies of memory & would appreciate any help you can offer.

Regards,
CDH

MATSONIC MS8308EP(266)

eBay.ie: Matsonic MS8308EP SCKT 462 MOTHERBOARD AMD DURON BUNDLE (item 160270644479 end time 08-Oct-08 21:37:23 BST) (http://cgi.ebay.ie/ws/eBayISAPI.dll?ViewItem&item=160270644479&indexURL=)

Maximum for this board is what you already have installed

Memory Support

Two DIMM slots for 168-pin SDRAM memory modules Support for 100/133 MHz memory bus Maximum installed memory is 2 x 512MB = 1GB

MATSONIC MS8308EP(266)

eBay.ie: Matsonic MS8308EP SCKT 462 MOTHERBOARD AMD DURON BUNDLE (item 160270644479 end time 08-Oct-08 21:37:23 BST) (http://cgi.ebay.ie/ws/eBayISAPI.dll?ViewItem&item=160270644479&indexURL=)

Maximum for this board is what you already have installed

Memory Support


Hi,
Apologies for the delay of response.
Thanks for the link seahwk83 very helpful.

Regards,

CDH