I would appreciate it if you could give me a step by step guide on hooking up a standard VCR to a Sony Bravia LCD TV. I just got DISH installed and would like to know where to connect my VCR. I.E> What on the back of the dish receiver do I plug in my vcr coaxial cable. THEN where (VCR) do I run my cables to the TV.

Thanks!

I don't use satellite but I'll give it a try. I assume there is a coxial cable plugged into an input jack on the back of the satellite receiver. If this is the case, locate the output jack on the receiver and run a coxial cable from there to the input jack of the VCR. Then, run another coaxial cable from the output jack on the VCR to the television. Hope this is correct.