How does a soleniod supposed to be wire on a murry lawn mower model #28v707

I have a murry riding lawn mower model #28v707 and I took the old solenoid out put the new one in and I want to know if I have it wired right how is it supposed to be wired

>Moved from electronics<

They are all but inpossible to hook up wrong. As long as you have the small wires on the small posts and the big wires on the big posts it should work.

If it has two small wires, one is a ground and the other is a positive. They engage the solenoid and make the two large post connect together inside. If it only has one small post then it grounds through the mounting screws on the solenoid and the small wire going to it is a positive wire that engages the solenoid.

Isn't that correct all you experts?