Karen_b
May 12, 2006, 07:07 PM
I too installed a RTH230B programmable thermostat this winter and all has been going well on the heat side. We tried to turn on the AC today, I get the symbol of the snowflake, but not the fan.
Here is my current wiring on the Thermostat:
G=Green
Y=Yellow
W=White
Rc=Red
Rh=Blue
The jumper JP2 on the back of the thermostat is on the two lower pins (closest to HG, and the pin by HE is exposed).
Here is how heat/AC unit is wired:
C=Blue
G=Green
Y=Yellow
W=White
R=Red
Thanks in advance for helping me solve my mess.
Here is my current wiring on the Thermostat:
G=Green
Y=Yellow
W=White
Rc=Red
Rh=Blue
The jumper JP2 on the back of the thermostat is on the two lower pins (closest to HG, and the pin by HE is exposed).
Here is how heat/AC unit is wired:
C=Blue
G=Green
Y=Yellow
W=White
R=Red
Thanks in advance for helping me solve my mess.