PDA

View Full Version : Open neutral


alali
Sep 12, 2008, 05:54 PM
Hi
When I test The neutral connection in motor starter panel I found Electricity in neutral line
And the push botten didn't start motor
What is the wrong and how can solve the problem
Thanks

eEnergyUnpluged
Nov 22, 2008, 05:50 PM
The neutral connection sometimes fails, this is usually due to a loose connector in the supply side of the circuit. You will need to look up stream until you find a good neutral. I usually start in the middle and keep dividing the problem in half. This takes less time.