PDA

View Full Version : Power problems during install


TodEth21
May 10, 2006, 08:08 AM
When trying to install windows xp professional on my PC it decides to turn off just as I am about to start installation. I have AMD athlon 3200, 2gb ram, WD raptor 74gb sata + maxtor 80gb hard drives, Plextor DVD/RW drive, sony DVD drive. Any help would be greeted with a thousand thanks.

Curlyben
May 10, 2006, 08:23 AM
Does this happen all the time ?

At what stage of the install does it happen ?

TodEth21
May 10, 2006, 09:55 AM
Yes it does and it happens right as I'm about to hit enter to proceed to install.

Tommyp!972
May 10, 2006, 06:10 PM
Try unhooking all the drives except the hard drive and dvd-rom... then give it another try while unhooked

TodEth21
May 12, 2006, 07:57 AM
I've managed to get to about 80% and it says it can not copy diskdump something or other and then decides to turn off.

Curlyben
May 12, 2006, 12:04 PM
Sounds like it maybe an insecure connection some where.
Time to crack your box and reseat ALL connections. e.g. RAM, PSU, DVD, etc
WHen reseating blowing out the connection with compressed air helps to remove built dust.

Hope this helps.