I replaced my filters and after everything was put back together there is no response from the blower, the furnace will heat up but the blower does not respond. The filter cover has been replaced and the cut-off switch is be pressed.
Thanks

Does the blower come on when you turn the thermostat control to ON instead of automatic?

The blower does not come on when put in the on position. The furnace will light and get hot but it will not blow.

You have a defective blower fan control. This item senses the heat in the unit and turns the fan on automatically. For now you can just leave the blower motor run on with the selector switch turned to on if you need heat.

Unless you have knowledge of furnaces and a electric test meter and know how to use it I would suggest you contact a local HVAC company for a ON SITE inspection and repair of your problem.