euslija
Aug 21, 2008, 09:25 AM
Hello!
We had a huge thunder yesterday afternoon and after that my both A/c quit working.
I had noticed that the circuit breaker for furnace 2 in the garage had tripped and which I reset.
On #1 a/c
On my thermostat which is honeywell T8001, I see that the * comes on and kicks the units outside but the atic blower does not start. And I had noticed that because of that there was icing in the atic blower, so I turned off the compressor outside.
On ac #2
Neither the outside unit turns on nor the blower in the atic. This one had the circuit breaker tripped in the garage pannel, which I reset. On the display of the thermostat, when I tun it to cool, the display starts to fade and eventually disappear.
I have kids and a sick mother at home with no air and a temprature of 85 degrees inside.
Any help will be appreciated
LJ
We had a huge thunder yesterday afternoon and after that my both A/c quit working.
I had noticed that the circuit breaker for furnace 2 in the garage had tripped and which I reset.
On #1 a/c
On my thermostat which is honeywell T8001, I see that the * comes on and kicks the units outside but the atic blower does not start. And I had noticed that because of that there was icing in the atic blower, so I turned off the compressor outside.
On ac #2
Neither the outside unit turns on nor the blower in the atic. This one had the circuit breaker tripped in the garage pannel, which I reset. On the display of the thermostat, when I tun it to cool, the display starts to fade and eventually disappear.
I have kids and a sick mother at home with no air and a temprature of 85 degrees inside.
Any help will be appreciated
LJ