PDA

View Full Version : Carrier 16 Seer infinity split system heat pump


jahfred
Jul 31, 2008, 04:38 PM
I live in the Leesburg, Florida area(outskirts of Orlando, Florida) and is considering using tthree ( 2, 3, and 4 ton) Carrier 16 SEER infinity series heat pumps in a new construction. Can anyone provide a breakdown of the average cost of each condenser (25HNA6... ), fan coil (FE4) and infinity controller?

Jahfred

wmproop
Jul 31, 2008, 07:20 PM
The salesperson/installer /contracter should be able to answer your questions,if not he should find out,, if not,, you may need to consider another installer

letmetellu
Jul 31, 2008, 07:44 PM
Add the amps used by each of the three units, multiply this number by 240 ( for the voltage ) this will give you the watts per hour. Then find out from your electric provider the charge per kilowatt hour. Then it will be up to you to determine how many hours you will run the units per month to find out the monthly bill, just for the units.

letmetellu
Jul 31, 2008, 07:47 PM
Of course I forgot to add the city and state, county and federal taxes, and then I am sure there will be a Fuel adjustment charge.

jahfred
Aug 8, 2008, 01:34 PM
Add the amps used by each of the three units, multiply this number by 240 ( for the voltage ) this will give you the watts per hour. Then find out from your electric provider the charge per kilowatt hour. Then it will be up to you to determine how many hours you will run the units per month to find out the monthly bill, just for the units.
Thanks for this information. However, I am actually interested in the price of the actual systems.

hvac1000
Aug 8, 2008, 07:05 PM
Thanks for this information. However, I am actually interested in the price of the actual systems

Sorry but there is no way we can give you a price on the system requirements for your home.Equipment and labor costs change depending upon where you live in the USA.

My recommendation is to call 2 or 3 local contractors and get estimates. This way it will be accurate.

jahfred
Aug 10, 2008, 11:16 PM
At the present point in the process, I am merely interested in a ballpark figure to aid in the decision making process. Particularly, what is the price - not including labor - of the FE4ANF003 and FE4ANB006 carrier infinity series air handlers? A ballpark figure would be greatly appreciated.

hvac1000
Aug 11, 2008, 06:28 AM
My recommendation is to call 2 or 3 local contractors and get estimates. This way it will be accurate

Unless you are a Carrier dealer you cannot get a price. A Carrier dealer will not post a price here. There is no such thing as a ball park price. SEE above.

Sorry but that is the way it is.