stadlock
Jul 17, 2008, 01:04 PM
We have a GE GSH25SGPC SS refrigerator which has been working just fine for the last 4 years or so. I noticed recently, however, that whenever the refrigerator door is closed, either normally or forcefully (we've got little kids) that it causes the freezer door open about 1/8 to 1/4 inch, depending on how hard the other door was shut.
This is wasting energy, of course.
I think the solution might be as simple as adjusting the closing force on the freezer door so that it holds the seal better. I'm reasonably satisfied that it's not the actual seal that is the problem because it passes the "dollar bill" test and seems to stick well enough to the door frame. It's just when the other door is closed with less than gentle force that the freezer seal breaks.
All suggestions are much appreciated, thanks!
This is wasting energy, of course.
I think the solution might be as simple as adjusting the closing force on the freezer door so that it holds the seal better. I'm reasonably satisfied that it's not the actual seal that is the problem because it passes the "dollar bill" test and seems to stick well enough to the door frame. It's just when the other door is closed with less than gentle force that the freezer seal breaks.
All suggestions are much appreciated, thanks!