Can you help with how to wire up a air handle and condensing unit

I want to wire up my air handler and condesing unit so what do I look for and how is it done?

JImmy... you need to start your own thread... that is, ask your question by itself... not tag onto this one.

<moved jimmy's thread to his own>

Jimmy:

In general the t-stat wires terminate in the furnace.

Usually two t-stat wires run from the furnace to the condenser for single stage non heat-pump systems.

In general, you run a LV cable from the t-stat to the furnace/air handler and an LV cable from the furnace/air handler to the condenser.

Now connect the dots.

Yes, there are exceptions.