View Full Version : 1999 Accord Stalls while stoping!
AccordHouston
Jun 16, 2008, 09:46 AM
My 1999 Accord Stalls while stoping!! There was a recall on the ignition switch which I got replaced. So while driving when I stop at a signal, the car stalles.so then I start the car and hold the key and drive. I was told to check the ignition problem by starting the car then wiggling the car keys... and I noticed that my car stalls just after little movement in the keys. So what should I get changed the ingnition switch or just the electrical component. Help. Thanks
TxGreaseMonkey
Jun 16, 2008, 10:11 AM
Honda Ignition Switch Replacement:
1. Disconnect negative battery cable.
2. Remove dashboard lower cover and knee bolster.
3. Disconnect 5-P connector from under-dash fuse box and 7-P connector from main wire harness.
4. Remove steering column covers.
5. Insert key and turn it to "0".
6. Remove two screws from switch and replace.
AccordHouston
Jun 16, 2008, 12:55 PM
Honda Ignition Switch Replacement:
1. Disconnect negative battery cable.
2. Remove dashboard lower cover and knee bolster.
3. Disconnect 5-P connector from under-dash fuse box and 7-P connector from main wire harness.
4. Remove steering column covers.
5. Insert key and turn it to "0".
6. Remove two screws from switch and replace.
Can you please tell me what is the part number I should get for honda accord 1999 lx and about how much they cost?
Thanks
TxGreaseMonkey
Jun 16, 2008, 01:50 PM
Check this out:
While we find your parts, please enter your ZIP Code at PartsAmerica.com (http://www.partsamerica.com/ProductDetail.aspx?MfrCode=BOR&MfrPartNumber=CS853)