PDA

View Full Version : Robert08 with bad wiring.


Stratmando
Jun 9, 2008, 06:42 AM
This is a message from robertr08 at Ask Me Help Desk ( https://www.askmehelpdesk.com/
). The Ask Me Help Desk owners cannot accept any responsibility for the contents
Of the email.

To email robertr08, you can use this online form:
https://www.askmehelpdesk.com/sendmessage.php?do=mailmember&u=350448

OR, by email:
Mailto:[email protected]

This is the message:

I think you're nothing but an obnoxious moron. Go yourself idiot!
XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX XXXXXXXXXXX
I received this message from a boy who didn't understand my answer. Can he be booted off for being a Jerk. I don't write him, went to respond, but am blocked, since the weasel won't receive my email, figure he can read it here. My answered was correct on this post, plus got a negative. Now am getting harassed?
Here is the Post:
Jun 5, 2008, 08:50 AM #2
Stratmando
Ultra Member





Join Date: May 2007
Location: Florida Keys
Posts: 3,428
I would use a Meter to check switching, May be the type switch that does one light or set of lights, another pull does other set, another pull lights all lights, and final pull is off. Say black is common, that goes to black from fan, blue could go to single light, red could go to other lights, all whites tie together.
If you eleminate bottom center light, you could have 2 opposite lights on one pull, and the other 2 opposing lights be the second pull.

Comments on this post
Robertr08 disagrees: off in left field somewhere
Fr_Chuck agrees: balance

donf
Jun 9, 2008, 07:49 AM
Strat,

From here on, Robert08 will get no answers from me.

Stratmando
Jun 9, 2008, 12:22 PM
Hey Donf, Thanks, I could see if My answer was "Out There", It was basically same answer as ceilingfans, just worded different? Can't please eveyone. Take Care