I have a Trane heat pump. The reversing valve is stuck in the heat cycle. What can I do to make it switch into the cool cycle? Condenser (outside unit is charged,. 150pii high and cver 200 on the low side... seems like it is stuck also. When unit starts the low side becomes hot and the high side gets cold.


I do not need the heat just the cool side. Handler has a heat strip for winter heating. I just need to resolve the valve problem.


If I need to change the valve what would be the easiest and most quick way. Afraid of ruining the new valve when installing due to piping in vertical position?

Make sure it is stuck and not just a bad coil.
Changing a valve is best left to a real professional (to many reasons to mention here).
If the valve will not reverse you are toast till it is replaced.
Once again make sure the coil is being powered up and that the valve is really defective before you make any more maneuvers OR call for professional on site help.