View Full Version : Can't hook up my VCR / DVD Player
VenusAlexis
May 22, 2008, 12:20 PM
:mad:
I have an Emerson TV, I don't know the model number or serial numbers but I do know its kind of new. It was given to me without any instructions or manuels.
My problem is this: I tried to hook up my VCR / DVD machine and I can't figure it out. I can hook everything up but I can't find the AUX on the menu. It does have a game in but not the AUX. I need some help so I can watch my tapes and DVDs.
ScottGem
May 22, 2008, 12:23 PM
The model and serial numbers should be on the TV somewhere. You can then go to Emerson's website to get a manual. Without seeing what the back for the set looks like its hard to advise.
progunr
May 22, 2008, 12:24 PM
Look in the menu, or on the remote for "source", or "video 1" or "Video 2" as most do not use the old Aux. as a selection anymore.
It may also show up as "line 1" or Line 2".
If not on the TV or the TV Remote, you should find it in the "set up" or "tuner" sub-menu.
VenusAlexis
May 22, 2008, 04:49 PM
Look in the menu, or on the remote for "source", or "video 1" or "Video 2" as most do not use the old Aux. as a selection anymore.
It may also show up as "line 1" or Line 2".
If not on the TV or the TV Remote, you should find it in the "set up" or "tuner" sub-menu.
Thanks for the quick response. There is no remote for my TV. There is nothing on the TV that is even labeled "Video" 1 or 2. Nor is there any line 1 or 2. As for the menu, all I keep getting is "Game" and that I don't know what to do with. It is either on or off but either way it doesn't solve my problem. Any other ideas that might help? Thanks, Venus Alexis
Stratmando
May 23, 2008, 07:54 AM
Does it have an"Input"button? Try below Channel 2.