fannie
May 8, 2003, 10:28 AM
Is there any way to cut glass easily? I've tried a little red tool that was recommended at Home Depot, but must not be strong enough to score it deeply enough. What other way is there? There must be some other way to do it. Maybe an attachment for a household drill or something?
rrt69
Dec 18, 2003, 06:23 PM
Try this on-line shopping site www.khue.com
sandyspacecase
Sep 2, 2008, 03:34 AM
OH no,there is not a tool to cut glass with using a drill. You are strong enough to do it. I weigh 105 lbs,and cut glass all the time. The Depot just sold you the wrong tool, or the cheapest tool to do it with. Buy a Glass cutter from ,"Red Devil" , "General Tools", or "Fletcher". One with multiple cutting wheels. Lay the glass flat, and with one smooth ,straight pull score the glass.Use the same amount of pressure all the way down the glass. Never go back over it. One stroke is all that is needed. Then (with a glove on) with a hand on each side of the score,snap the glass into. You can lay it on the edge of a table to do this. That is all it takes. If you want go to DelphiGlass.com . They have a lot of cutting tools,sanders,other stuff for glass work.