studyingal
May 15, 2008, 06:24 PM
I have a Trane heat pump with the air handler in the attic. We attempted to change the thermostat from a GE to a Honeywell. I have received confirmation from a specialist that we have wired everything properly.
We cannot, however, get the heat pump to engage (or do anything, for that matter). We flipped the circuit breakers at both the air handler and the heat pump, as well as the main board. Everyone keeps telling us to look for a fuse, or to test voltage on wires from the heat pump itself. I have a meter, but I can't get to/locate wires from the heat pump.
We have no a/c and the temp keeps creeping up outside. Help??
Thanks
We cannot, however, get the heat pump to engage (or do anything, for that matter). We flipped the circuit breakers at both the air handler and the heat pump, as well as the main board. Everyone keeps telling us to look for a fuse, or to test voltage on wires from the heat pump itself. I have a meter, but I can't get to/locate wires from the heat pump.
We have no a/c and the temp keeps creeping up outside. Help??
Thanks