Log in

View Full Version : GFCI will not reset-red buttons keeps popping


lifescientist
May 10, 2008, 07:11 PM
My one GFCI outlet pops its red button occasionally. :( Now it is has popped with nothing plugged into any of the outlets that I can determine are connected with it and it will not stay in - keeps popping out. What does this indicate, is it a fire hazard in any way, and what can I try? Meanwhile I am without an outlet in two bathrooms and one outside outlet (covered) Thanks :confused:

Elias1270
May 10, 2008, 08:08 PM
I wouldn't say that it is a fire hazard but you should just change the GFCI outlet for a new one. If it happens to do the same thing it is possible you are not correctly grounded. Hope that helps.

KISS
May 10, 2008, 08:59 PM
Elias:

GFCI's don't have to have a ground to work.

It's possible that a critter made a nest in the outside outlet,

The little red button popped out means there is a slight leakage path to ground and the button popped like it's supposed to.

Critters and moisture can easily do it. So can a defective outlet. So can defective wiring and so can a defective GFCI.

For starters, it means inspecting the outlets/boxes and wiring.

lifescientist
May 10, 2008, 09:27 PM
Both the answers I received give me something to go on. Thanks!:D