mr500
Apr 21, 2008, 02:51 PM
Well over the weekend I finished up my garage/workshop. I went with #3 along w/#8 instead of the 2-2-4-6 for my main run. Installed 4 circuits all gfi protected. Not many I know but works for me.
The 27ft run with the 3 #3's and the one #8 kicked my Azz let me tell you. I don't know how all you do that work everyday. I didn't think I was going to EVER get those wires to do what I wanted. Hats off to you guys!!
Everything is up and running, GFi's seem to be tripping good, and my little light tester shows no problems at the receptacles.
Are there any more tests to make sure all this is correct besides the plug in tester with the 3 lights on it?
Just wanted to say thanks ALL you guys, stanfortyman, stratmando, washington1, keepitsimple and alll the others I forgot to mention for ALLL the help and advice with this matter over the last few months. So far everything is A-OK!
Mike R.
The 27ft run with the 3 #3's and the one #8 kicked my Azz let me tell you. I don't know how all you do that work everyday. I didn't think I was going to EVER get those wires to do what I wanted. Hats off to you guys!!
Everything is up and running, GFi's seem to be tripping good, and my little light tester shows no problems at the receptacles.
Are there any more tests to make sure all this is correct besides the plug in tester with the 3 lights on it?
Just wanted to say thanks ALL you guys, stanfortyman, stratmando, washington1, keepitsimple and alll the others I forgot to mention for ALLL the help and advice with this matter over the last few months. So far everything is A-OK!
Mike R.