PDA

View Full Version : 95 civic, after I washed the motor, the car won't run


oxte
Apr 19, 2008, 04:38 PM
Hello, I have a 1995 honda civic, and I washed the motor, after I washed it the car start fine ,but then it lost power and it doesn't run the same as before,it sound funny, but it doesn't runs strong anymore. Please help me!!

twinkiedooter
Apr 19, 2008, 06:31 PM
You got some moisture into the electrical system when you washed the engine.

RickMN
Apr 19, 2008, 09:05 PM
I agree with twinkiedooter. Remove the distributor cap and see if you have moisture in there. If so, wipe it out and hit with a can of compressed air.

TxGreaseMonkey
Apr 20, 2008, 12:12 PM
. Spark plug wires. Spray with WD-40, which will displace moisture and help prevent secondary voltage from shorting out. If this solves the problem, it indicates the spark plug wires need replacing.

. Distributor Cap. Moisture can develop inside the distributor cap. Make sure to use a ventilated cap with a good O-ring. It's important for the O-ring to seal properly between the cap and housing. Coat the O-ring with silicone grease. If moisture has developed, dry the inside of the cap with a paper towel and spray with WD-40, wiping off the excess.