View Full Version : Craftsman Lawn Tractor
HOARD3652
Apr 17, 2008, 05:33 AM
I have a Craftsman Lawn Tractor model no. 917.272751. I have put new belts,blades,spark plug,gas filter,air filter,battery, solenoid and 3 new starters. It will not start. If I keep trying to start it burns the starter up. If I hand turn the motor backward a few times it will start right up. Why?
MOWERMAN2468
Apr 17, 2008, 03:05 PM
I have a Craftsman Lawn Tractor model no. 917.272751. I have put new belts,blades,spark plug,gas filter,air filter,battery, solenoid and 3 new starters. It will not start. If I keep trying to start it burns the starter up. If I hand turn the motor backward a few times it will start right up. Why?
Your question is being moved to lawn and garden.
SkipB
Apr 18, 2008, 02:14 PM
It sounds like the starter gear is jamming up on the flywheel and binding the starter. I don't know what engine is on this unit, but it could be a valve adjustment if it's an OHV motor.
HOARD3652
Apr 18, 2008, 06:31 PM
It sounds like the starter gear is jamming up on the flywheel and binding the starter. I don't know what engine is on this unit, but it could be a valve adjustment if it's an OHV motor.
It ia a 18.0 HP Briggs & Stratton
SkipB
Apr 19, 2008, 05:22 AM
It sounds like the valves have to be adjusted to the proper clearance.
HOARD3652
Apr 19, 2008, 06:31 AM
It sounds like the valves have to be adjusted to the proper clearance.
You have been so much help. Thank you
MOWERMAN2468
Apr 19, 2008, 08:09 AM
Yep, the valves are out of adjustment probably.
HOARD3652
Apr 19, 2008, 06:21 PM
Yep, the valves are out of adjustment probably.
Thank you