I have a Harbor Breeze ceiling fan that just recently stopped working. It has a remote and pull chains but neither are able to operate the fan. I have read on this site that it may be the transmitter or receiver. Also one response said I could configure the fan for just pull chain operation. Can anyone tell me the procedure to due this?

THanks

Does the fan have pullchains?

It has a remote and pull chains

Ok, you can open the ceiling canopy, remove the remote receiver and wire the fan without it.

Did the fan and lights stop working at the same time?

Have you checked for a tripped breaker or possibly a GFCI outlet that tripped and stopped feeding the circuit for the fan and lights?

A possible option, but given the likelihood of failure of remote receivers.. .