extensioncord
Feb 28, 2008, 08:28 PM
Hi All
I just moved into a condo not too long ago and have a Whalen Series IV heat pump/AC. The wires from the unit are G, B, Y, W, & R. They are plugged into a Simple Comfort 2001 thermostat. In the thermostat the connections are G, B, Y, W, C, & R. The yellow wire from the unit goes into the Y connector in the t-stat with a jumper that goes into the W connector. The W wire from the unit goes into the C connector in the t-stat.
The Noma unit I have only has 4 wires and runs on two AA batteries. It has connectors for G, R, Y, & W. Is this unit (Noma 52-2557-0) compatible with my heat pump even though the wires don't match up?
If anyone has installed one of these I would greatly appreciate the help...
Thanks!
I just moved into a condo not too long ago and have a Whalen Series IV heat pump/AC. The wires from the unit are G, B, Y, W, & R. They are plugged into a Simple Comfort 2001 thermostat. In the thermostat the connections are G, B, Y, W, C, & R. The yellow wire from the unit goes into the Y connector in the t-stat with a jumper that goes into the W connector. The W wire from the unit goes into the C connector in the t-stat.
The Noma unit I have only has 4 wires and runs on two AA batteries. It has connectors for G, R, Y, & W. Is this unit (Noma 52-2557-0) compatible with my heat pump even though the wires don't match up?
If anyone has installed one of these I would greatly appreciate the help...
Thanks!