I was having a little problem with the rpm of the car(seems it was sometimes working on 3 cylinders,decidedto cleaned my distibuter and the car ran for 4 second,and just died... no spark what happened,I went to get a new distributer and rotor but no spark :( thanks for help...

If Cap and rotor are fine, I would take a look at spark plug condition, Fuel filter.

Have gas at starting

You are going to also need pressure. Try this:
https://www.askmehelpdesk.com/cars-trucks/faq-how-troubleshoot-repair-maintain-hondas-46563.html

Thanks

Perform tests, as described in Sections A and B, below:

https://www.askmehelpdesk.com/cars-trucks/faq-how-troubleshoot-repair-maintain-hondas-46563.html

Could someone tell me were the ECM is thanks

Just a question, Did you make sure that all spark plug wires were connected back in proper firing order?

See if this helps:

https://www.askmehelpdesk.com/cars-trucks/faq-how-troubleshoot-repair-maintain-hondas-46563-3.html#post235038

Found my trouble coil... thanks eve:p yone