Hi this is my first post on here and I was wondering if anyone could help me.
I have a PC and a laptop both with wireless cards. I've managed to connect the 2 and have good signal. I went into my internet connection settings and clicked the check box "allow others to connect through this computers internet connection". I checked ip config and I have no IP for mt default gate way. When I open IE it says "detecting proxy settings" in the bottom left corner. If any can help me I would really appreciate it. (so many frustrating hours :confused: lol )

HI there and welcome.

My advice to you is NOT to setup Internet connection sharing on an ahdoc wireless network as it is massively unsecure, leaving yourself wide open for "hackers" and spammers.
If you are running a cable or DSL connection you would be wise to invest in an internet gateway router.
Basically it's a box that connects to your DSl/Cable line and shares the internet connection to your computers either via cables or wirelessly.
This kind of setup is easy to do and comes with a whole host of security features including a dedicated hardware firewall, a must have on a Broadband connection.

Linksys (http://www.linksys.com/servlet/Satellite?childpagename=US%2FLayout&packedargs=c%3DL_Content_C1%26cid%3D1115417027773&pagename=Linksys%2FCommon%2FVisitorWrapper) make some excellent boxes that do just this.
Here (http://www.linksys.com/servlet/Satellite?childpagename=US%2FLayout&packedargs=c%3DL_Product_C1%26cid%3D1115416939789&pagename=Linksys%2FCommon%2FVisitorWrapper) are their wireless gateways.

Hope this helps.

Ps there's no need to double post ;)

It sounds like you have the connection coming in from the ethernet connector or a modem and then out through the wireless card. If so you have to bridge the connections. Then both can connect. I have a feeling that you are not very computer savy( I may be wrong) and this can be rather hard to figure out. But the easiest is just to pick up a wireless router they are pretty cheap now and easy to setup.

The easiest way to share files on your network is to set up sharing with a homegroup. If you don't have a homegroup, you can share files by placing them in one of the Public folders. Any file or folder you put in a Public folder is automatically shared with the people connected to your network. To turn on Public folder sharing, follow these steps:

1.

Open Advanced sharing settings by clicking the Start button Picture of the Start button, and then clicking Control Panel. In the search box, type network, click Network and Sharing Center, and then, in the left pane, click Change advanced sharing settings.
2.

Click the chevron Picture of the chevron icon to expand the current network profile.
3.

Under Public folder sharing, click one of the following options:
*

Turn on sharing so anyone with network access can read and write files in the Public folders
*

Turn off Public folder sharing (people logged on to this computer can still access these folders)
4.

Click Save changes. Administrator permission required If you're prompted for an administrator password or confirmation, type the password or provide confirmation.

You will need to repeat the previous steps on each computer that you want to share files from.

To share your files, save them or copy them to a Public folder on your computer. There is a Public folder for each type of library (Documents, Music, Videos, and Pictures). Every person with a user account on the computer shares these folders. For example, to open the Public Documents folder:
1.

Open the Documents library by clicking the Start button Picture of the Start button, and then clicking Documents.
2.

In the navigation pane, under Libraries, double-click Documents, and then double-click Public Documents.


Or
First of all the drive u want to sear go to his property then make it sear file,then in which the file you want to sear go to run edit her system i.p addrash then enter,now you can sear -ankuj uniyal