We have a jet pump in our basement.The jet pump is running steady.The tank is not filling up.There is lots of water in the line and the pressure is great.Why do we have no water in the tapes?

What is pressure gauge on tank say. Pump cut off switch may need to be adjusted. Check to insure that all valves on lines coming out of tank are open.

We have no pressure gauge on the tank.All valves on lines are open.My hubby tried to adjust pump cut off switch.Is there anything else that we can do?

We have a jet pump in our basement.The jet pump is running steady.The tank is not filling up.There is lots of water in the line and the pressure is great.Why do we have no water in the tapes?
What tank are you talking about? Would this be a galvanized pressure tank or a small bladder tank? Lots of water in WHAT line? The suction line,( the line to the wel), or the line from the pump to the tank? If you're running your pump dry you will burn out the seals. Please give us more details to work with. Regards, Tom

Thank you for all your help.My hubby went out and bought a new regulator.Every thing is working again.Thank you again.

Suggest that you install a pressure gauge so that you know what's going on.