Hi,

My Weed Eater mower blade attachment belt broke. I bought a new one, the same size, but no matter how I wrap it through the pulleys it is either too short or too long. The attachment has five pulleys; one for each blade, the engine pulley and then two pulleys in the center. One of the pulleys in the center is the tension pulley. Does any one know how to install the belt or know where I can find a diagram?

Thanks in advance

I'm so :confused:

Look in your owners manual. I think it makes a big "T" go from one blade pulley across the rear of the deck to the other pulley that turns the other blade, then gather belt at center which will be the front edge of the pulleys you just went around and go to the inside edge of both pulleys at the front center. Then go around the pto pulley on the engine.

Hi,

My Weed Eater mower blade attachment belt broke. I bought a new one, the same size, but no matter how I wrap it through the pulleys it is either too short or too long. The attachment has five pulleys; one for each blade, the engine pulley and then two pulleys in the center. One of the pulleys in the center is the tension pulley. Does any one know how to install the belt or know where I can find a diagram?

Thanks in advance

I'm so :confused:
Look under the footrest for a diagram
Mine has a sticker stuck up on the bottom of the footrest for belt diagram
Hope this helps