number1fishguy
Jan 23, 2008, 06:05 PM
I have a year old Fleetwood mobile home that has 2 shower heads in a stall shower, the diverters have a lever which pulls up, then left and right.
The water temperature can be adjusted with great care to a comfortable temperature, but moving the lever less than 1/8" results in either direction gives a temperature change that makes you jump out of the way.
Is there any way to adjust the amount of mix inside the diverter? Or anything short of replacing the diverters which will allow me to adjust the temperature normally.
Thanks
The water temperature can be adjusted with great care to a comfortable temperature, but moving the lever less than 1/8" results in either direction gives a temperature change that makes you jump out of the way.
Is there any way to adjust the amount of mix inside the diverter? Or anything short of replacing the diverters which will allow me to adjust the temperature normally.
Thanks