PDA

View Full Version : "no signal" on boot up.


skyline_rules
Jan 14, 2008, 12:07 AM
Dear people,

While going through my music on limewire, my PC freezed, so I restarted the computer and the screen came up saying no signal, I let it stay for about 2 minutes and it didn't do anything, I restarted it 3 more times and did the same thing. I can't change bios or anything because there is no video feed going throguh.
I changed the moniter with two other ones and it did the same thing. :mad: :mad:

Fan is spinning I can here it start up, I took out ram and it beeped, which means(I think) the motherboard is fine, I am borrowing my brothers ram this weekend and putting it in and seeing if it works.

Please, any other suggestion would be much needed.:) :D

p.s I really don't want to pay someone who is an expert for a easy fix problem.

Wondergirl
Jan 14, 2008, 12:10 AM
Unplug it, sing "Jingle Bells," then plug it back into the surge protector or outlet?

skyline_rules
Jan 14, 2008, 02:11 PM
Did that but it didn't work

seahwk83
Jan 14, 2008, 05:50 PM
Your computer is not receiving a signal from the monitor
Make sure monitor is securely plugged in to PC
Try another monitor if you have one avail to see if it is the monitor
If another monitor does same thing, it is video card
If another monitor works, it's the original monitor as the problem

skyline_rules
Jan 15, 2008, 03:08 PM
Yes, I have tried it with another monitor and the same thing happened, I've unplugged the computer and plugged it back in and the same thing, I'm going to try ram first and try a new video card.

seahwk83
Jan 15, 2008, 04:11 PM
Sound lik a plan, post back