PDA

View Full Version : Bought a used duerr chipper and it won start


gilligan899
Jan 11, 2008, 04:16 PM
I bought a used chipper that hasn't been used but a few times I know thi becaue I know the old owner he didn't have a manuel for it but now it just won't start I know it set up a couple of years any ideas what's wrong

ballengerb1
Jan 11, 2008, 04:33 PM
Start by doing an oil change, plug replacement & gap, drain old gas and open the carb bowl. Drain the carb and flush the bowl, carb and needle valve with carb cleaner. Temporarily remove the air filter completely until you get it started, then install a new filter. Spray a bit of cold weather starting fluid into the air intake and give it a go.

MOWERMAN2468
Jan 12, 2008, 06:46 AM
Carb is probably gummed up. Remove the carb and clean it thouroughly and then reassemble and readjust.