John80y
Dec 29, 2007, 10:35 AM
I have a Lennox electric heater that's about 6 years old.. We have annual maintenance on it, last winter it wasn't blowing hot air so we called them out and they replaced a part (possibly a limit switch but could also be a relay) It was instant warm air..
Same thing has happened this winter except a different furnace guy came out (same company) came out and said everything was working fine. Which is weird because the furnace has been running non stop for 4 days and it struggles to get above 71 degrees in daytime, it was 67 degrees this morning at 9am.
I checked the switches and they all seem to have power, my next stop is replace the relay as I have no real way of testing it.. Can anyone suggest I do anything else or replace anything else ? I know the smart thing to do is call a different repair man but this last place just cost me $$$ and said all is fine.. (which it obviously isn't).
TIA
Same thing has happened this winter except a different furnace guy came out (same company) came out and said everything was working fine. Which is weird because the furnace has been running non stop for 4 days and it struggles to get above 71 degrees in daytime, it was 67 degrees this morning at 9am.
I checked the switches and they all seem to have power, my next stop is replace the relay as I have no real way of testing it.. Can anyone suggest I do anything else or replace anything else ? I know the smart thing to do is call a different repair man but this last place just cost me $$$ and said all is fine.. (which it obviously isn't).
TIA