Hi I have a Ultra Murray snowblower Model # m-f2484020 8hp 24". I need a manual so I can get the belts to replace for the snowblower. Can you please help me, I just need the measurement or the part number for the belts.

Check your model number again. The only thing I get when I Google that number is you, this post at the help desk. This means, apparently, you are the only person in recent history to post this model number, on earth.

1st Belt part number 579932 Belt, V 3L, 33.13 LONG
2nd Belt Part Number 581264 Belt, V 4L, 35.23 LONG

He is not the only person on the planet to have that exact model number as I have the same snowblower.

Model number on sticker on left side of gear housing reads:

F2484020 Code 5234

It is a Murray Ultra 8hp 24" Electric Start Snow Thrower with a Tecumseh Snow King engine.

I am finding it very difficult, as the original poster, to find anything online about this model and the manual listings I've found all say "NLA - No Longer Available".

I did however find a site that has parts and they were all in stock. While I could not find my model number using the search engine on their site, I called and the man was very helpful and thorough and he found my model and all the parts that I needed (both belts, chute assembly, worm gear assembly, universal pivot block, and shear pins) and they will be here in 5-7 bus days. Best part, they were cheap!

Link: Lawn mower parts, Snow thrower parts, Chainsaw parts and MORE, Click and save! (http://www.outdoordistributors.com/parts.html)

Hi,
I have reason to believe that thunderbird53 gave you the part #s as it is a Noma snowthrower branded as Murray currently owned by Briggs and now manufactured and supported by AYP. I did not have any luck at the manual site for Murray that Briggs maintains, but I did just post a picture on a Craftsman question here that is a Noma, also. Few different configurations exist, it just cost too much to make.
Peace,
Clarke

He is not the only person on the planet to have that exact model number as I have the same snowblower.

Model number on sticker on left side of gear housing reads:

F2484020 Code 5234

It is a Murray Ultra 8hp 24" Electric Start Snow Thrower with a Tecumseh Snow King engine.

I am finding it very difficult, as the original poster, to find anything online about this model and the manual listings I've found all say "NLA - No Longer Available".

I did however find a site that has parts and they were all in stock. While I could not find my model number using the search engine on their site, I called and the man was very helpful and thorough and he found my model and all the parts that I needed (both belts, chute assembly, worm gear assembly, universal pivot block, and shear pins) and they will be here in 5-7 bus days. Best part, they were cheap!

Link: Lawn mower parts, Snow thrower parts, Chainsaw parts and MORE, Click and save! (http://www.outdoordistributors.com/parts.html)



This is great. I have the same machine (unknown year), with a "Agway" brand on it (made by Murray). I have had difficulty finding parts... right now I'm looking for a worm gear.

You can find a complete online mannual at Ordertree.com (http://www.ordertree.com/ARI.aspx?Mfg=63&Model=624808x6A%20Dual%20Stage%20Snow%20Thrower%20 (2001)) not all parts are available any more, but it is a good source.

The code seems to be how you date the machine e.g. 5234 would be made on the 234th day of 2005 from what I can tell.
I'm looking for any info I can find on a similar machine a Murray Ultra 22in 5hp Techum. Engine
Model #G2250030 code 6354

Hi,
I did not find it at OrderTree (Dixie) but found it available by reques at:
Murray st Parts Diagram Index for F2484-020 (http://partsandservice.com/html/Murray/st/stf2484-020.html)
And Frank52 yours is there at:
Murray st Parts Diagram Index for G2250-030 (http://partsandservice.com/html/Murray/st/stg2250-030.html)
Peace,
Clarke

crigby,
Great stuff, thanks so much.
Cheers,
Frank

Check your model number again. The only thing I get when I google that number is you, this post at the help desk. This means, apparently, you are the only person in recent history to post this model number, on earth.

I purchased mine at a garage sale, I need a manual, looks brand new,no year, part I need according to him assy,dish shaped with rubber housing,shaft with cogged gear on one end?

I'd like a user manual for a Murray F2250030. My father in law gave it to me, and he's no longer in a position to tell me anything about it. I can't get it started and am not sure what all of the controls are.

Can any of you help me?

Try this url:

http://dl.owneriq.net/e/e2826d20-893b-4e09-ad87-4a242c3a76cb.pdf

Its not the exact model but should help with regards to maintenance and repairs

I have the same number f2484020 code 5270 Tecumseh motor 8hp hmsk80 155556T