PDA

View Full Version : Installing new built-in dishwasher with temp. Hookups


johnab
Dec 7, 2007, 06:27 AM
I purchased a new built in dishwasher and want to know if I can use a temp.water hookup rather than get a plumber

speedball1
Dec 7, 2007, 06:36 AM
Hooking up a dishwasher's a simple operation. What's you reason for doing a temporary hook up and how were you going to do it? If you need specific instructions to do a permanent hook up click on back. Regards, tom

johnab
Dec 7, 2007, 07:20 AM
I had a portable dishwasher before and only want to hook the water to the faucet and the drain to the sink rather than hook it permanent

johnab
Dec 7, 2007, 07:52 AM
I had a portable dishwasher and want to install built in and want to hook the water to the tap and drain to the sink rather than get a plumber

ballengerb1
Dec 7, 2007, 09:36 AM
John, slow down with the "disagrees" since Speedball1 was asking you a question and needed more info to give you a good answer. Sure you can do a temporary hook up to the sink, just recycle the old hoses and faucet connector from you old washer. If you did not keep the old hoses the drain is simply a rubber hose, you might even get away with a length of garedn hose. The supply line is a special connector that gets added to you faucet and I don't see a safe way around buying this connector. If I missed anything just write back to us.