My kenmore elite dryer model number 110.7005 2991 runs fine, but with no heat. What steps do I need to use to diagnose the problem. As usual, I cannot locate the manual.

Thanks in advance for your help.:)

Fixitnow.com Samurai Appliance Repair Man » Blog Archive » Kenmore Elite and Whirlpool 27″ Electric Dryers: Run but Doesn't Heat (http://fixitnow.com/wp/2006/03/30/kenmore-elite-and-whirlpool-27-electric-dryers-run-but-doesnt-heat/)
Or it could be that your thermal cut-off fuse is broken, try and check it with a multi meter, just had the same problem with my dryer. Hope this helps.

my kenmore elite dryer model number 110.7005 2991 runs fine, but with no heat. What steps do i need to use to diagnose the problem. As usual, I cannot locate the manual.

thanks in advance for your help.:)
Check your fuses.. dryers have 2 ciruits in them.. one for heat one for drum motor.. if not could be element or a wire off or burnt.. good luck...

Where do I look for the heating problem in my kenmore elite dryer for an element <it is not heating up>,do I open the back and what do I look for thank you

Having similar problem as everyone else except in my case the dryer works for only a short period, then the buzzer sounds and the motor/heating element shutdown prematurely - even when in timed mode. Any ideas? I don't think it is a build up lint in the outlet hose, because this problem happens intermittently. However, it seems to be occurring more frequently. It doesn't matter if it is at the low or high temp settings. Do I have a control board or sensor problem?