My ignition on my rider went out and I have another rider with a good ignition, can I change the bad ignition out with the one that works and if I can how would I do this if they have different colored wires? Thanks Kandice

Sounds as though you evidentially have two separate manufactures. The only way you could change the switches is to either have all the same identification marks on each switch in the same location, or draw out both switch diagrams and then change the wires as needed in the female plug adapter. The identifications will be on the blade or beside the blade on the ignition switch. You must remember that you have changed the wires, and if you sell the unit, you must tell the purchaser that the ignition switch is not original equipment and some wires have been changed.