Log in

View Full Version : HP Evo d510


hd_usermspi
Nov 15, 2005, 09:29 PM
Hi please help

I have an hp evo d510. When I power on the desktop the led indicator is just blinking... my PC doesn't start up... any idea?

StuMegu
Nov 16, 2005, 01:45 AM
Just a quick thought, try removing the power lead from the computer for about 5 minutes, and re-inserting it. I've seen some branded machines that go into a kind of safe mode after a small surge on the power system. The only way to make them start is to cut all power and allow them to reset.

Curlyben
Nov 16, 2005, 02:53 AM
Sounds like it has gone into standby mode.
As Stu says, pull the power and then reboot.
Once you get in check your power settings.
I don't use either standby or Hibernate as I find them an annoyance, but then again they are not really recommended for a laptop anyway ;)

hytechnm
Nov 17, 2005, 01:35 AM
I believe HP uses the leds (power and hard drive) as a trouble shooting tool
Check HP website, I think you will find you have a bad system (mother) board
Or so they say, sorry for the bad news!