I have a Frigidaire wall oven mod # FEB30SABA and the lower heating element is not heating at all. I replaced the element and still no heat. I pulled the feed wires into the oven and checked for voltage with the oven on. No voltage. What next?
Thanks

Jnelson472- It sounds to me that if ,it's not getting power at the element , then it is probley your (lower Control switch ) First chec to make sure a breaker or one of 2 screw in fusses are OK. If not one of these 2 , then go to the temp. setting switch. Good luck F.B.E.

I have a Frigidaire wall oven mod # FEB30SABA and the lower heating element is not heating at all. I replaced the element and still no heat. I pulled the feed wires into the oven and checked for voltage with the oven on. No voltage. What next??
thanks
Thanks FBE, Turns out there is proper voltage to both elements when oven is on. I figure the new element is defective and am getting another one.

I'm Glad you found it. Just turn off piwer at panel before starting, Stay safe and good luck. F.B.E.