I need to find prices on transmission pans I searched everywhere and I can find prices just not prices for a 1997 Ford Taurus but if anyone can help it would be greatly appreciated or if you have any ideas how to fix a cracked transmission pan then that would also be helpful. Thank you for your help.

I don't think it is a good idea to fix it.
The only one I found was 218.00 but then you didn't give more information (like v6)to find the exact one. This is the one I found While we find your parts, please enter your ZIP Code at PartsAmerica.com (http://www.partsamerica.com/productdetail.aspx?MfrCode=BNM&MfrPartNumber=40290)
You can try at that site using your zip code.

You could also check with junk yards but they probably want to sell something like that with the whole tranny.

What engine and transaxle do you have?

Thoughts:

. Depending upon where, and how bad, the crack is, you may be able to thoroughly clean and braze a patch. A local MIG welder might be able to do a great job repairing it.

. Check with local and national salvage yards.

I have a 2000 Taurus, with the 3.0L Duratec engine and AX4N transaxle.

I need to find prices on transmission pans i searched everywhere and i can find prices just not prices for a 1997 Ford Taurus but if anyone can help it would be greatly appreciated or if you have any ideas how to fix a cracked transmission pan then that would also be helpful. thank you for your help.
If it's only cracked, I would use J B Weld
J-B Weld Company - J-B WELD Product Information (http://jbweld.net/products/jbweld.php)