GARISSA
Oct 4, 2007, 06:15 PM
My waser is just 4 yrs old it does not detect super/laerge / small water just keep pouring till its at super level and when it comes to dainning it drains well but machine des not spin
Did replace washer timer and pressure switch but still wayer level goes high and washer does not spin.
Flying Blue Eagle
Oct 4, 2007, 07:02 PM
Garissa -: go to the swiych thah says ( water level,or ,small, med , large ) that switch sounds to me like it's messing.There is also a flot switch inside the washer cabinet that may be sticking. Since you have already changed the timer wsitch and still have the spin cycle not operating right ,Iwould have to check it ouy. DO you still have your owners manule, If you do look in the section that gives yyou answers for different types of mech. Problems. IF you don't have one ,talk to someone in the large appliance dept where you bought it ,if they can't tell you what is the cause then ask them to get you a manule for the washer should be no charge. Also ask them (who does there repair on appliances they sell then talk to them . Hope I've helped in some way ,If I have ,Rate my answer below .F.B.E. have a good day