I am Looking for a diagram to replace belts on our dryers. I don't know and can't find out if there is two or one. OR how to get to it.:mad: Can't find were they go. Help. Any help would be appericate.

It only has one belt. Remove the cabinet front and the blower inlet duct. Reach back an disengage the drive belt belt from the idler. Remove the four screws from the bulkhead ( the bottom front corners of the bulkhead are supported by slots in the cabinet sides) This will help your support and align the bulkhead when assembling. While holding the drum in place, lift out the bulkhead. Now lift out the drum and replace the belt. When reinstalling the belt, it goes around the drum,the idler pulley the motor pinion.