PDA

View Full Version : Luxpro thermostat to hunter 44260


tom108
Sep 27, 2007, 03:01 PM
OK I have looked everywhere and crossed reference as many charts as I can but I still can not seem to find a definite wiring diagram for this.

My old Luxpro wiring goes like this and it makes sense.

RED WIRE connected to R
GREEN WIRE connected to G
ORANGE WIRE connected to O
WHITE WIRE connected to W2
YELLOW WIRE connected to Y

However the Hunter Model 44260 has the following codes on the back

G
Rc
Rh
Y/O
W/B
Y1


I can not for the life of me figure out how to wire this. Any help would be great. I looked at the sticky to try and cross reference but had no luck.

Thanks,
-Tom

acetc
Sep 27, 2007, 04:46 PM
The Hunter is a single stage heat and your old one is a two stage heat, you need a two stage heat pump thermostat. Mike

tom108
Sep 27, 2007, 05:13 PM
The Hunter is a single stage heat and your old one is a two stage heat, you need a two stage heat pump thermostat. Mike


Thanks Mike!
Back to Lowe's I guess. ;)

lloydb82
Sep 16, 2008, 06:30 AM
http://www.hardwarestore.com/media/pdf-misc/603274.pdf

Two stage heating
Look on the back of the hunter thermostat and you will see a switch that will say std or HP. Switch it to STD. all should work well now

wmproop
Sep 16, 2008, 05:34 PM
While you are at Lowe's,, get you a good tstat ,most anything besides a Hunter